RE: [OM] Film rewind lever rattles (since I fixed it, ahem)

[Timpe, Jim]

I missed which body this is for.  I recently replaced my entire rewind crank
(for a 4T) courtesy John H. for a very reasonable sum (just a bit beyond $10
as I recall).  It's the way to go IMHO.

-----Original Message-----
From: Doggre@xxxxxxx [mailto:Doggre@xxxxxxx]
Sent: Wednesday, September 19, 2001 12:43 PM
To: olympus@xxxxxxxxxxxxxxx
Subject: Re: [OM] Film rewind lever rattles (since I fixed it, ahem)


Two possible solutions:  bend the pin (paper clip section) a little, or 
alternatively, flatten/distort it a little so it's wider (smash it with a 
ball peen hammer -- hey, it's a piece of paperclip -- if you mess it up,
make 
another!).  Don't alter any Oly parts from the camera itself.  No need.

(Provided until John H. or Clint chimes in with the REAL answer)

Rich

< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >

< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >