Is there a prefered way to keep the screw from moving? One of my
cameras has a very loose screw which needs to be adjusted almost every
time I use it for more than a couple hours.
-jeff
On 11/13/06, John Hermanson <omtech1@xxxxxxxxxxx> wrote:
>
> Sounds like the adjustment screw inside the release button is set too
> high. If you look inside the hole where the cable release goes, you
> should see the head of a small slotted screw.
> using a #2 screwdriver, carefully turn the screw down a revolution or
> two, then try relight function. Shutter should fire just before the
> button mechanically bottoms out. If you turn screw too far, relight
> function may stop working.
>
> ___________________________________
> John Hermanson
> Camtech Photo Services, Inc.
> 21 South Lane, Huntington NY 11743
> 631-424-2121 | Olympus OM Service since 1977
> http://www.zuiko.com | omtech1 AT verizon.net
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|