Olympus-OM
[Top] [All Lists]

[OM] Re: Meter on OM-4Ti

Subject: [OM] Re: Meter on OM-4Ti
From: Chuck Norcutt <chucknorcutt@xxxxxxxxxxx>
Date: Mon, 13 Nov 2006 15:00:33 -0500
One word.  Epoxy!

Chuck Norcutt

Jeff Keller wrote:

> Is there a prefered way to keep the screw from moving? One of my
> cameras has a very loose screw which needs to be adjusted almost every
> time I use it for more than a couple hours.
> 
> -jeff
> 
> On 11/13/06, John Hermanson <omtech1@xxxxxxxxxxx> wrote:
> 
>>Sounds like the adjustment screw inside the release button is set too
>>high. If you look inside the hole where the cable release goes, you
>>should see the head of a small slotted screw.
>>using a #2 screwdriver, carefully turn the screw down a revolution or
>>two, then try relight function.  Shutter should fire just before the
>>button mechanically bottoms out. If you turn screw too far, relight
>>function may stop working.
>>
>>___________________________________
>>John Hermanson
>>Camtech Photo Services, Inc.
>>21 South Lane, Huntington NY 11743
>>631-424-2121 | Olympus OM Service since 1977
>>http://www.zuiko.com  |  omtech1 AT verizon.net
> 
> 
> ==============================================
> List usage info:     http://www.zuikoholic.com
> List nannies:        olympusadmin@xxxxxxxxxx
> ==============================================
> 
> 


==============================================
List usage info:     http://www.zuikoholic.com
List nannies:        olympusadmin@xxxxxxxxxx
==============================================

<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz