On the 4T spot metering is not possible in flash mode. And if you are
not using a T-series or F280 flash, the flash should NOT fire if the
camera is in AUTO mode.
If you want to use non-dedicated flash., make sure the user isn't fooled
by the camera!
Happy New Year one and all
Piers (a lurker who happens to have a 4T manual on his desk)
-----Original Message-----
From: owner-olympus@xxxxxxxxxxxxxxx
[mailto:owner-olympus@xxxxxxxxxxxxxxx] On Behalf Of Andrew Gullen
Sent: Thursday, January 09, 2003 4:04 PM
To: olympus@xxxxxxxxxxxxxxx
Subject: [OM] Re: OM-4T + non-OM flash question (Duh)
Oops - nix that one. When I tried with the big strobe all worked fine.
The light then came on (pun intended) and I retried with the small
flash, giving generous flash on a white target. No problem.
Probable explanation: the main subject in the first test was small, and
a lot of the rest of the scene was farther from the flash. Fall-off gave
less light there, and the camera was patiently waiting for more.
A bit embarrassing, but instructive. If you want to use auto, make sure
the camera isn't fooled. Spot mode would have been appropriate here.
Regards,
Andrew
----------
> From: Andrew Gullen <andrew.gullen@xxxxxxxxxxxx>
> Date: Thu, 09 Jan 2003 10:19:24 -0500
> I just tested a shoe-mounted Contax flash on it. It seemed to work
> fine on manual, but when I tested on auto the shutter stayed open a
> long time...
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|