The AC adapters put (something like) 300V directly into the main cap of
the flash.
John
R. Wastell wrote:
>
> The external power socket works with the Olympus AC Adapter 2. The adapter
> does work with the T-Series flashes alone as well. The AC Adapter will not
> charge the batteries in the bounce grip or flashes.
>
> I believe the AC Adapter 3 will also work although several on this list have
> reported possible electrical problems with it (Not UL approved).
>
> Bob
>
> -----Original Message-----
> From: Trevor J. Noble <noble@xxxxxxxxx>
> To: olympus@xxxxxxxxxxxxxxx <olympus@xxxxxxxxxxxxxxx>
> Date: Wednesday, February 03, 1999 3:30 PM
> Subject: [OM] Bounce Grip 2 socket info
>
> >I have searched the FAQs and the Olympus System Chart for any info on the
> >three-pin socket at the side of the Bounce Grip 2. A dealer said it was for
> >operating the unit from mains power but had never seen a cable. No mention
> >in the Olympus System Chart either. Can anyone tell me please:
> >1. If it is a power socket, is it for 110V or 220V - no voltage switch to
> be
> >seen?
> >2. Does it just power the unit or can it recharge batteries too?
> >3. Is a cable available from Olympus - whats its designation?
> >4. What are the pin connections - (there are three), is one an earth or
> >ground?
> >5. Are the pin connections the same as for the T32 (T20?) flash?
> >
> >Regards
> >Trevor J. Noble
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|