7 minutes in HC-110 dilution B, agitation by inversion every 30 seconds.
Remove the back, pick the pressure plate away from the back with your
fingernail and you can see how the sheet metal spring slots onto a rivet on
the back. Remove the pressure plate, place it on a piece of backing paper
and cut around it, leaving enough extra to lap about a quarter inch of paper
arounf the leading and trailing edges of the plate. Tape in place with
mylar (Scotch Magic) tape. reassemble.
Gary
----- Original Message -----
From: "Skip Williams" <skipwilliamsom@xxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Cc: <garyetx@xxxxxxxxx>
Sent: Saturday, March 09, 2002 9:11 PM
Subject: Re: [OM] infrared shot
> How did you develop the HSI?
>
> And how did you attach the 120 paper to the pressure plate?
>
> SKip
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|