Olympus-OM
[Top] [All Lists]

[OM] Zuiko Shades & Coatings - coating "colors"

Subject: [OM] Zuiko Shades & Coatings - coating "colors"
From: Larry <Halpert@xxxxxxxxxxx>
Date: Fri, 16 Jun 2000 02:36:36 -0400
My Zuiko MC 50mm f1.4 serial #854836 coating reflects reds, pinks, yellows &
whites, but I see no greenish like my 100mm 2.8 or 28mm 2.8 (and 50mm 1.8 for
that matter). Is this a less effective multicoating formulation, or an extremely
early version of the MC version of this lens? Or, is this a newer version..(or
probably equally effective as the greenish cast ones, whenever it was made?)

Any opinions?

Larry



     Date: Wed, 19 May 1999 04:36:54 -0700
     From: William Sommerwerck <williams@xxxxxxxxxx>
     Subject: [OM] coating "colors"



Strictly speaking, the materials used to make  lens coatings have no colors of
their own -- they are clear and colorless. In this literal sense, the pompous
salesman is correct.

However -- the coatings are applied in layers thinner than a wavelength of light

in order to create an "impedance match" between air and glass, so that less
light is reflected.

The degree of matching varies with wavelength, it being "perfect" (that is,
preventing all reflection) only at the wavelength where the coating is 1/4-wave
thick. It is less-effective at other wavelengths, which is why the reflection
seems to have a color. Single-coated lenses look purplish, because more light is

reflected at red and blue wavelengths than at green.

Multicoating uses several layers to get better matching over a wider range of
wavelengths. These apparently provide more correction at the longest and
shortest wavelengths, leaving a net greenish reflection. Note, however, that MC
lenses show less total reflection than SC lenses.









< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz