The first thing I would do is take a pencil eraser and polish all the
connections and
see if that helped
Terry
wiliam.wagenaar@xxxxxxxxxxxxxx wrote:
> Hello Olympians
>
> I wanted to use my Winder-2 today and found out that it did not work properly
> on
> both my bodies (OM-1 and OM-2n) The winder simply won't advance the frame or
> expose the shot. It does not matter if the switch is set to single or
> continuous. Only somtimes after fidling the winder on the body it will fire,
> but
> I cannot exactly say waht makes the diffrence. I allready cleaned the contact
> of
> the bodies and the winder without result.
>
> Can anyone give me some hints on what I can expect to be wrong or even what it
> will cost to repair (if neccesary, John?), Or maybe simply buying another
> winder
> on the seconf hand market is cheaper?
>
> Wiliam
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|