Olympus-OM
[Top] [All Lists]

Re: [OM] OM-2000 modification : I did it.

Subject: Re: [OM] OM-2000 modification : I did it.
From: John Hermanson <omtech@xxxxxxxxx>
Date: Thu, 25 Jun 1998 19:42:56 -0400
Nice trick.  But it would  only have the warranty because no one can tell
it had been taken apart, right?

John

Frank van Lindert wrote:

> Hello all, in particular John H. and Tomoko Y.
>
> I made the modification needed to have the shutter being no longer
> blocked by the winder switch in rest position.
> I have never made any modification this easy, and what is more
> important (warranty!) it is completely reversible.
>
> You only need to deassemble the winder switch (by unscrewing the tiny
> Phillips screw on the downside of the handle) and taking temporarily
> away the next three parts lying around its axis.
> Then the blocking ring is lying on top and the only thing I did was
> turn it upside down, making sure that the little protuberance in the
> ring which would normally shift under the shutter points to the back
> rather than to the front (maybe I should say to eight o'clock instead
> of ten o'clock)
> After that you can reassemble the winder switch exactly as it was
> before. The little protuberance now lies almost exactly under the
> winder handle.
> All it took was exactly three minutes... and now the OM2000 is free of
> the annoying Nikon inherited eye-threatener. And it still has twelve
> months of warranty - I didn't even have to open the camera body.
>
> Frank van Lindert
> Utrecht NL.
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >






< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz