This applies to: 2S, 3, 3Ti, 4. 4T, 4Ti. The 2 / 2N is truly mechanical at B
and by the
way, firing the 1/ 1N / 2 / 2N with a motor or winder with the body set to B
gives you
a shutter speed of 1/500th.
John
Rand E. Tomcala wrote:
> John,
> Does this apply to any other OM's ? i.e. OM2,2n,2sp etc ?
> Rand E.
>
> <><><><><><><><><><><><><>
> > John Hermanson wrote:
> >
> > > Thats right! Since flash sync goes through the IC, it will not work on
> > > the
> > > mechanical 60 with dead batteries. It will work at the setting if there
> > > are
> > > good batteries in the camera.
> > > Also, it is normal for the shutter to give no exposure on mechanical 60
> > > with a
> > > motor/winder and dead batteries. Not good in my opinion, but normal.
> > > We noticed these while doing incoming inspections of the first OM-4s back
> > > in
> > > 84(?) It was in this shipment taht I found an OM-4 with a serial
> > > number below
> > > 1,000,000. It's out there somewhere.
> > > (I sold it some time ago).
> > >
> > > John
> > > Camtech
>
> --
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|