Olympus-OM
[Top] [All Lists]

Re: [OM] [OT] Toyo 45G convert to 810G

Subject: Re: [OM] [OT] Toyo 45G convert to 810G
From: Michael Wong <mialop.wong@xxxxxxxxx>
Date: Tue, 26 Jul 2016 21:47:55 +0800
Yes, Ed.

My friends advise me to buy a 8x10 camera better and seems the conversion
kit is difficult to be found. Preliminary I don't want to get one more
large format camera since I have 2 4x5 camera so that I wish to convert my
45G to 810G. However, it seems not a good idea.



Cheers,
Michael

On 26 July 2016 at 21:07, Sawyer, Edward <Ed.Sawyer@xxxxxxx> wrote:

> It’s hard to say without looking at it. How much front rise can you get
> out of the 4x5?
>
> The reason a new front standard may be needed is picture how the rear
> standard has a horizontal centerline that is going to be about 5” above the
> bottom of the rear standard when in the vertical orientation.  To make the
> front standard come to that same vertical axis you would need 2.5” of rise
> on the front standard I’d think, or a way to space the front standard
> higher off the rail.
>
> Another option (if you have the range of movements) is tilt the whole rail
> rearward, then tilt both standards forward to align them and handle the
> offset (indirect rise).
>
> 8x10 can be a seductive format, but costs go up a *lot*:  film, lenses
> (that cover 8x10), enlarging lenses, etc.
>
> -Ed
>
>
>
>
>
> On 7/26/16, 6:16 AM, "olympus on behalf of
> olympus-request@xxxxxxxxxxxxxxxxx" <olympus-bounces+ed.sawyer=
> unh.edu@xxxxxxxxxxxxxxxxx on behalf of olympus-request@xxxxxxxxxxxxxxxxx>
> wrote:
>
> >On 7/22/2016 11:36 PM, Michael Wong wrote:
> >>I wish to try 8x10 since the 8x10 enlarger is made for printing. I search
> >>internet and get some information that my Toyo 45G can be converted to
> 810G
> >>by changing the rear frame, the focus component and the bellow (Please
> >>correct me if I'm wrong). However, someone told me I have to change the
> >>front frame as well since the center line of 8x10 is different 4x5. I
> have
> >>found no more information about the front frame changing from 45G to 810G
> >>from internet.
> >>
> >>Since I have limited budget and don't want to hold one more camera. I
> hope
> >>I may use my Toyo 45G converting to 8x10 and I may use it to take both
> 4x5
> >>& 8x10 :p
> >>
> >>Any list member may give some advices?
> >>
> >>Thank you very much!!!!
> >>
> >>
> >>Cheers,
> >>Michael
> --
> _________________________________________________________________
> Options: http://lists.thomasclausen.net/mailman/listinfo/olympus
> Archives: http://lists.thomasclausen.net/mailman/private/olympus/
> Themed Olympus Photo Exhibition: http://www.tope.nl/
>
>
-- 
_________________________________________________________________
Options: http://lists.thomasclausen.net/mailman/listinfo/olympus
Archives: http://lists.thomasclausen.net/mailman/private/olympus/
Themed Olympus Photo Exhibition: http://www.tope.nl/

<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz