Olympus-OM
[Top] [All Lists]

[OM] Re: OM30 Manual Problem fixed!

Subject: [OM] Re: OM30 Manual Problem fixed!
From: "John Hermanson" <omtech@xxxxxxxxx>
Date: Tue, 20 Sep 2005 09:03:29 -0400
Brushes on the switches found in OM-10, G, F, PC, 20, 30, 40 are a weak link 
as they are held in place by plastic pins which are melted down over them.

John Hermanson
Camtech Photo Services, Inc.
21 South Lane, Huntington, NY 11743
631-424-2121  |  omtech@xxxxxxxxx
              www.zuiko.com
Factory Trained OM Service since 1977
__________________________________
----- Original Message ----- 
From: "Bao C. Ha" <bao@xxxxxxxxx>
To: <olympus@xxxxxxxxxx>
Sent: Tuesday, September 20, 2005 2:16 AM
Subject: [OM] OM30 Manual Problem fixed!


>
> Thanks for all the helps!
>
> Using suggestions of Photosphere and John Hermanson, I
> opened up the switch, found a "loose" leg of the three
> legs on the switch. "Glued" it back on to the switch, I
> can now use the manual mode.
>
> Now, how do I fix the bulb mode? In the buld mode,
> everytime the shutter is fired, it seems that the camera
> has a mirror lockup. Turn the switch to manual mode
> releases the mirror.
>
> Bao
>
> On Sat, September 17, 2005 8:38 pm, Bao C. Ha wrote:
>>
>> Ouch! It probably costs more than what it worths to repair it.
>>
>> For the time being, I have been using the exposure compensation
>> dial to swing +/- 2 EV, playing with the shutter speeds.
>>
>> Bao
>>
>> On Sat, September 17, 2005 8:27 pm, Bruce Nolting wrote:
>>>
>>> I had that same problem with an OM2n once, they had to replace a circuit
>>> board.
>>>
>>> Bruce
>>>
>>>> -----Original Message-----
>>>> From: olympus-owner@xxxxxxxxxx
>>>> [mailto:olympus-owner@xxxxxxxxxx] On Behalf Of Bao C. Ha
>>>> Sent: Saturday, September 17, 2005 9:22 PM
>>>> To: olympus@xxxxxxxxxx
>>>> Subject: [OM] Om30 manual problem
>>>>
>>>>
>>>>
>>>> Hello,
>>>>
>>>> I have just gotten an OmF (Om30). It seems to work fine in
>>>> automatic mode. However, when I switch to manual mode or bulb
>>>> mode, it still works as in automatic mode.
>>>>
>>>> Is there an easy way to fix it?
>>>>
>>>> Appreciate any suggestions or comments.
>>>> Bao
>>>> --
>>>> Best Regards.
>>>> Bao C. Ha
>>>> Hacom OpenBrick Distributor USA http://www.hacom.net
>>>> voice: (714) 530-8817 fax: (714) 530-8818
>>>> 8D66 6672 7A9B 6879 85CD 42E0 9F6C 7908 ED95 6B38
>>>>
>>>>
>>>> ==============================================
>>>> List usage info:     http://www.zuikoholic.com
>>>> List nannies:        olympusadmin@xxxxxxxxxx
>>>> ==============================================
>>>>
>>>
>>>
>>>
>>> ==============================================
>>> List usage info:     http://www.zuikoholic.com
>>> List nannies:        olympusadmin@xxxxxxxxxx
>>> ==============================================
>>>
>>
>>
>> --
>> Best Regards.
>> Bao C. Ha
>> Hacom OpenBrick Distributor USA http://www.hacom.net
>> voice: (714) 530-8817 fax: (714) 530-8818
>> 8D66 6672 7A9B 6879 85CD 42E0 9F6C 7908 ED95 6B38
>>
>>
>> ==============================================
>> List usage info:     http://www.zuikoholic.com
>> List nannies:        olympusadmin@xxxxxxxxxx
>> ==============================================
>>
>
>
> -- 
> Best Regards.
> Bao C. Ha
> Hacom OpenBrick Distributor USA http://www.hacom.net
> voice: (714) 530-8817 fax: (714) 530-8818
> 8D66 6672 7A9B 6879 85CD 42E0 9F6C 7908 ED95 6B38
>
>
> ==============================================
> List usage info:     http://www.zuikoholic.com
> List nannies:        olympusadmin@xxxxxxxxxx
> ==============================================
> 


==============================================
List usage info:     http://www.zuikoholic.com
List nannies:        olympusadmin@xxxxxxxxxx
==============================================

<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz