Olympus-OM
[Top] [All Lists]

[OM] Re: Motor drive 2 problem

Subject: [OM] Re: Motor drive 2 problem
From: asud journal <asudjournal@xxxxxxxxxxxxxxxx>
Date: Mon, 24 Jan 2005 17:19:21 +0100
Yes, it could be the solution but when i retime the switch it just 
firing in single mode in all the ways.
The sequence mode seems to have disapear. Maybe a short circuit in the 
card board?
Loïc
Le 24 janv. 05, à 17:00, Piers Hemy a écrit :

>
> Sounds like the rotary switch on the M15V has becone mis-adjusted.  
> Refer to
> Scott Gomez' site that I pointed out to you previously, there are 
> pictures
> there of what you need to do.
>
> --
> Piers
>
> -----Original Message-----
> From: olympus-owner@xxxxxxxxxx [mailto:olympus-owner@xxxxxxxxxx] On 
> Behalf
> Of asud journal
> Sent: 24 January 2005 15:32
> To: olympus@xxxxxxxxxx
> Subject: [OM] Motor drive 2 problem
>
>
> Hello zuiks,
> I have change the nicad batts on two m15v control packs.
> The batts work well, but with one of the two control packs the shutter 
> fire
> only in single mode on the two position of the dial knob.
> The second work ok in sequence and single mode. it seems not to be a 
> problem
> in the motor drive.
> Maybe somebody on the the list know the problem and had already fix it?
> Loïc
>
> ==============================================
> List usage info:     http://www.zuikoholic.com
> List nannies:        olympusadmin@xxxxxxxxxx
> ==============================================
>

==============================================
List usage info:     http://www.zuikoholic.com
List nannies:        olympusadmin@xxxxxxxxxx
==============================================

<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz