Olympus-OM
[Top] [All Lists]

[OM] Re: Motor drive 2 problem

Subject: [OM] Re: Motor drive 2 problem
From: "Piers Hemy" <piers@xxxxxxxx>
Date: Mon, 24 Jan 2005 16:00:44 -0000
Sounds like the rotary switch on the M15V has becone mis-adjusted.  Refer to
Scott Gomez' site that I pointed out to you previously, there are pictures
there of what you need to do. 

--
Piers 
 
-----Original Message-----
From: olympus-owner@xxxxxxxxxx [mailto:olympus-owner@xxxxxxxxxx] On Behalf
Of asud journal
Sent: 24 January 2005 15:32
To: olympus@xxxxxxxxxx
Subject: [OM] Motor drive 2 problem


Hello zuiks,
I have change the nicad batts on two m15v control packs.
The batts work well, but with one of the two control packs the shutter fire
only in single mode on the two position of the dial knob.
The second work ok in sequence and single mode. it seems not to be a problem
in the motor drive.
Maybe somebody on the the list know the problem and had already fix it?
Loïc

==============================================
List usage info:     http://www.zuikoholic.com
List nannies:        olympusadmin@xxxxxxxxxx
==============================================

<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz