Olympus-OM
[Top] [All Lists]

RE: [OM] Minolta 5400, was CH Ling's Portrait shots

Subject: RE: [OM] Minolta 5400, was CH Ling's Portrait shots
From: "Dick Lague" <rlague@xxxxxxxxxxx>
Date: Sat, 23 Aug 2003 22:10:44 -0700
Cc: <jrk_om@xxxxxxxxxxx>
funny about the manual.  the Scan Dual II manual PDF currently on the Minolta 
site still tells you to insert emulsion side up, and the Scan Dual III manual 
tells you emulsion side down.  And these are pretty much the same unit with 
improvements for the III. 

-----Original Message-----
From: owner-olympus@xxxxxxxxxxxxxxx
[mailto:owner-olympus@xxxxxxxxxxxxxxx]On Behalf Of Lama-Jim L'Hommedieu
Sent: Saturday, August 23, 2003 6:43 PM
To: olympus@xxxxxxxxxxxxxxx
Cc: jrk_om@xxxxxxxxxxx
Subject: Re: [OM] Minolta 5400, was CH Ling's Portrait shots


Jeff,
I read on the scantips.com site that the Minolta "Utility" for the Scan Dual II 
will throw away any instructions you design on the
"Image Correction" tab if you have selected '16-bit linear' in the Preferences 
window.  To them, "linear" means 'without the user's
corrections.  Doh!  Minolta's incredibly bad owner's manual doesn't say this.  
By the way, the manual tells you to load the holder
emulsion up.  Don't.  It's upside down like that.  It will give you 
"inside-out" images and the scanner will be looking at the
emulsion through the base side which means you'll lose more image.  Didn't 
anyone proof-read it??!!

In time trials, I've found that the Utility takes no more time to make and 
write 16 bit images to the hard drive than 8-bit ones.
That's helpful.

In the past I spent a bunch of time with the histogram in Minolta's "Utilty" 
because I do a lot of available light work.

Now I get as close as I can with one image in Utility, then scan whole strips 
of 6 as 16-bit scans.  I know I can throw big
adjustments at 16-bit images in Photoshop without getting artifacts.  I use 
<Ctrl> <L> to reach the "Levels" window in the blink of
an eye.

I convert to 8'bit (Image>Mode>8bit) before saving as a .jpg or printing.

<shrug>  It works for me and took weeks to figure out.  Hey, I'm not the 
sharpest tool in the shed.  :)

Lama

From: "Jeff Keller" <jrk_om@xxxxxxxxxxx>
> The Min*lta scan utility I use provides "the color depth can be selected
> from 8 bit, 16 bit, or 16 bit linear". I use the 16 bit option. I saw a
> number of newsgroup posts about compressing the image file but didn't
> try to follow them.
>
> I've read claims that manipulating an 8 bit image can result in problems
> but that 8 bit is just as good for printing.
>
> I've got a lot I need to learn about it.


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >




< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz