Olympus-OM
[Top] [All Lists]

RE: [OM] Fool proof way?

Subject: RE: [OM] Fool proof way?
From: "Piers Hemy" <piers@xxxxxxxx>
Date: Mon, 30 Jun 2003 12:20:34 +0100
But take care, because HTML can let you down - you have to make sure and
tighten up the film after you load it, else if the film is loose on the
spool in the cassette, the rewind knob *won't* turn when you advance the
film.

Piers

-----Original Message-----
From: owner-olympus@xxxxxxxxxxxxxxx [mailto:owner-olympus@xxxxxxxxxxxxxxx]
On Behalf Of Daniel
Sent: 30 June 2003 10:03
To: olympus@xxxxxxxxxxxxxxx
Subject: RE: [OM] Fool proof way?


I also noticed something after doing the tension test technique. When
there's film, the spool spins when you advance the film No film no spin :)
Dan

-----Original Message-----
From: owner-olympus@xxxxxxxxxxxxxxx [mailto:owner-olympus@xxxxxxxxxxxxxxx]
On Behalf Of Piers Hemy
Sent: Sunday, June 29, 2003 11:24 PM
To: olympus@xxxxxxxxxxxxxxx
Subject: RE: [OM] Fool proof way?

A       Open the back and feel for film.  If you don't have a darkroom
or
changing bag, you want to be careful how/where you do this.  If you aren't
confident of your ability to do this ...

B       Try rewinding the film *without* turning/pressing the rewind
button.
If there is film in the camera, you will feel the rewind crank tighten up.
If there is no film in the camera, you will be able to turn it freely for as
long as you like, until you are satisified that there is likely no film in
the camera.  Then you can open the back and look, where you may discover
there *was* film, but it is now all safely wound into the cassette.

OR

C       Look at the exposure counter - if it is at "S" then any film in
the
camera is not yet exposed, so you can risk method A.

Apologies for what some will think is an HTML post (Hardly Takes Much
Looking)

Piers


-----Original Message-----
From: owner-olympus@xxxxxxxxxxxxxxx [mailto:owner-olympus@xxxxxxxxxxxxxxx]
On Behalf Of Daniel
Sent: 30 June 2003 07:43
To: olympus@xxxxxxxxxxxxxxx
Subject: [OM] Fool proof way?


--snip
how can I be sure I have film in the camera after losing track sometimes?
Dan



< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >



< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz