You need something for the modeling lights or to power the T Power Control
unit in place of the (4) AAs? If it's meant to plug into the front of the T
Power you might as well use an Olympus pack. You need about 200V going in
there. The Zip Drive transformer could possibly be used for the modeling
lights, though. Good idea.
_________________________________
John Hermanson www.zuiko.com
Camtech, Olympus Sales & Service since 1977
New OM & Used, Digital, Pearlcorders, Binoculars
21 South Lane, Huntington NY 11743-4714
631-424-2121
_________________________________
----- Original Message -----
From: "--p.j." <johnsonpa@xxxxxxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Thursday, February 07, 2002 10:00 PM
Subject: Re: [OM] T-10 power source
> I remember someone way-back mentioned that they used the same power source
> for their Zip drive. I think Iomega has since changed the type of plug
they
> use, however. I suppose you could get a generic 6V power supply, cut off
> the plug and add the required one for the T-10 flash (we're talking about
> the modeling lights, right?) I'm not sure if polarity would matter, but
> there are others here with waaaaayyyyy more knowledge than me. I'm sure
> they will help you out.
> BTW, a NIB AC Adapter 3 just sold on theBay. I can't remember what it
sold
> for ($70, maybe), but it seemed pretty high, like you said.
>
> HTH,
> --p.j.
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|