Olympus-OM
[Top] [All Lists]

RE: Re: [OM] Need information about MD 1

Subject: RE: Re: [OM] Need information about MD 1
From: "jamesfc@xxxxxxx" <jamesfc@xxxxxxx>
Date: Fri, 2 Nov 2001 13:50:07 -0500
Actually, I think I have one of these remote cables - I'm going to have to look 
through my goodies and see!

Jim Caldwell
Zuikoholic

Original Message:
-----------------
From: Jim Couch JamesBCouch@xxxxxxxxxxxxx
Date: Fri, 02 Nov 2001 09:16:35 -0800
To: olympus@xxxxxxxxxxxxxxx
Subject: Re: [OM] Need information about MD 1


Jim,

The easiest way to set up the older MD-1 for remote firing is to get one of the 
Relay Cords 1.2m or 10m This gmoves the battey
pack off the MD1 and it can be fired remotely from those distances, but better 
yet it has two little terminals that you put wires
into and run to a remote switch, pretty much any distance you choose!

That way there is no need for modification to the unit.

Jim Couch

"jamesfc@xxxxxxx" wrote:

> Thanks John!  How difficult would it be to retrofit a remote firing connector 
> into this older MD1?  Should I even consider it?
>
> Jim Caldwell


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >

--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz