The original Motor Drive 1 (with the big firing button) does not have a
provision
for storing the cap. I think that later models did in the form of a well in the
MD body.
DAVDOU9211@xxxxxxx wrote:
> I just made an interesting discovery. I removed the battery holder from the
> base of my Winder 1. Intention was to be sure the contacts were clean. When
> I looked inside I discovered a MD cap in a slot. I looked in the Winder 1
> Instuction Manual and that is where one is to store the cap when using the
> Winder!
>
> So, if any of you have acquired a pre-owned Winder, look in there, you may
> find one of those eslusive caps. I imagine the Winder 2 and the Motor Drive
> accessories have a similar storage area.
>
> Lesson: When all else fails, read the instructions.
>
> Dave Dougherty
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|