In later OM models (e.g. OM-3, OM-4), the motor drive socket cover is the
same size as the battery cover (interchangeable). In this case, the cover
cannot be stored in the winder.
end
Regards
Bruce Appelbaum
Yorktown Heights, New York
----- Original Message -----
From: <DAVDOU9211@xxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Saturday, October 14, 2000 11:43 AM
Subject: [OM] MD Caps for OM1MD, 2, 2n
> I just made an interesting discovery. I removed the battery holder from
the
> base of my Winder 1. Intention was to be sure the contacts were clean.
When
> I looked inside I discovered a MD cap in a slot. I looked in the Winder 1
> Instuction Manual and that is where one is to store the cap when using the
> Winder!
>
> So, if any of you have acquired a pre-owned Winder, look in there, you may
> find one of those eslusive caps. I imagine the Winder 2 and the Motor
Drive
> accessories have a similar storage area.
>
> Lesson: When all else fails, read the instructions.
>
> Dave Dougherty
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|