Olympus-OM
[Top] [All Lists]

Re: [OM] T32 power supply

Subject: Re: [OM] T32 power supply
From: "John Hermanson" <omtech@xxxxxxxxx>
Date: Wed, 23 Feb 2000 16:53:20 -0500
The pins on the T flashes require a supply of 300V.

John  Hermanson
___________________________________
Camtech, Olympus Service since 1977.
21 South Ln.  Huntington NY 11743-4714
631-424-2121 http://www.zuiko.com
Free Olympus Manuals: 1-800-221-3000
___________________________________
----- Original Message -----
From: Frank van Lindert <lindertv@xxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Wednesday, February 23, 2000 10:16 AM
Subject: Re: [OM] T32 power supply


> Robin,
>
> I hope you realize that the 3-pin connector expects high voltage to be
> applied. This is what the Olympus AC adapters 2 and 3 will do properly
> for almost all T-series flashes.
> You can also use the Quantum Turbo Power source for this purpose - and
> that is where the special connectors come in. Quantum has connectors
> for their Turbo batteries, but of course you could use them also for
> any setup made by yourself.
>
> If you want to go the low-voltage way: Think of using Quantum 1
> batteries (6 volt).
>
> Frank van Lindert
> Utrecht NL.
>
> On Wed, 23 Feb 2000 15:30:50 +0200 (EET), Robin M Allen
> <rallen@xxxxxxxxx> wrote:
>
> >Hello All
> >
> >I'm planning to make a mains power supply for a T32 flash.  I dont have
the
> >correct plug to fit on the flash but I though I could make do with
> >individual slip on connectors held together in epoxy putty.  I just
wondered
> >why there are 3 pins on the power in connector.  Is there a diode to stop
> >the batteries in the T32 from receiving a current 'backwards' through
them
> >when their combined cell voltage is less than the input voltage across
the
> >connector?  I thought this might happen if the batteries in a BG2 were
new
> >but the ones in the T32 were run down.  Does anyone know what the typical
> >current is during charging so I can select an appropriate power supply?
> >
> >Has anyone done all this stuff before and I missed it?  I dont suppose
the
> >connector is some standard item that I can buy separately?
> >
> >Robin M Allen
> >
> >PS
> >I've got the OM bug real bad now.
> >
> >---------------------------------------------------------------------
> >Dr Robin M Allen
> >Laboratory of Physical Chemistry and Electrochemistry
> >Helsinki University of Technology
> >PO Box 6100                          tel    +358 9 451 2577 (fax)2580
> >FIN-02015 HUT                      email             rallen@xxxxxxxxx
> >Finland                              www   http://www.hut.fi/~rallen/
> >---------------------------------------------------------------------
> >
> >
> >< This message was delivered via the Olympus Mailing List >
> >< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> >< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz