Olympus-OM
[Top] [All Lists]

RE: [OM] TTL multiconnector

Subject: RE: [OM] TTL multiconnector
From: "Brian P. Huber" <bphuber@xxxxxxxxxx>
Date: Wed, 29 Sep 1999 22:09:26 -0400
John,
F280 has 7 pins rather than the T-series 5 pins in the connector.
I also imagine that Skip, Hans, Frank and others are correct about F280 not
working with other flash units. When I responded, I was out of town and did
not have access to the F280.

Brian P. Huber

Troy, OH
bphuber@xxxxxxxxxx

-----Original Message-----
From:   owner-olympus@xxxxxxxxxxxxxxx [mailto:owner-olympus@xxxxxxxxxxxxxxx]
On Behalf Of John Hermanson
Sent:   Wednesday, September 29, 1999 8:24 PM
To:     olympus@xxxxxxxxxxxxxxx
Subject:        Re: [OM] TTL multiconnector

Does the F280 shoe have a similar pin layout to a T flash?  I've never seen
one.  I'd think that since a plain TTL cord won't fit the 280 socket, that
it was probably made not to work properly in plain TTL mode with other T
flashes in the loop.

John
----------------------------------------------------------------
Camtech / Olympus Service since 1977
21 South La., Huntington NY 11743-4714
516-424-2121     http://www.zuiko.com

> The manual for the F 280 says (first Q in the Q&A section) that the F280
> can't be used with other flashes. Even if you can connect the F280 on the
> hot shoe and a T32 via a cable, the problem is probably different electric
> voltage or something. I haven't tried this combunation, I don't wanna fry
> the electronics in my 4T.
>
> So you'd better use the F280 alone.
>
> I have often used the multi connector with 2 T32s thru photo umbrellas.
> Easy set up and great for even lit portraits of children.
>


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz