Olympus-OM
[Top] [All Lists]

Re: [OM] Replacing bottom plate (was "Please recommend repair ..."

Subject: Re: [OM] Replacing bottom plate (was "Please recommend repair ..."
From: John Hermanson <omtech@xxxxxxxxx>
Date: Sun, 12 Jul 1998 00:10:44 -0400
I shoulda known.  The 2S does not accommodate power rewind.

John

rockwell@xxxxxxxxxxx wrote:

> I'm looking at the bottom plates of my OM-2S & OM-4 side-by-side. They
> appear identical EXCEPT the 4 has the hole for the rewind fork and a
> round hole near the electrical contacts for the "screw" that opens the
> rewind hole, where the 2S lacks the rewind hole and has only an oblong
> depression near the electrical contacts to accept the driver for the
> rewind port opener "screw".
>
> Neal      Rockwell@xxxxxxxxxxx     Panama City, FL
>
> John Hermanson wrote:
> >
> > 2S bottom may be the same as a 3,4 etc.  I've never compared them.  An OM-1 
> > is
> > different from a 2 bottom, in battery cap fit and serial number 
> > progression, because
> > 2 production never went as high as an OM-1 new bottom cover number.
> >
> > John
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >




< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz