Olympus-OM
[Top] [All Lists]

Re: [OM] OT: Film Speed Error

Subject: Re: [OM] OT: Film Speed Error
From: Winsor Crosby <wincros@xxxxxxx>
Date: Fri, 8 May 1998 21:17:21 -0700
Unless the exposure compensation dial had been set. It is a simple matter
to use it and forget it. Load film, set ASA, notice the exposure
compensation is not set back to zero, reset it and change the ASA at the
same time.

Winsor

>John;
>
>I think it's pretty tough to accidentally change the ASA on the 4T.  Don't
>you have to pull the dial up, then turn?  I've done the wrong setting thing
>too. I'd definitely push the film one stop to 800.  Good luck.
>
>
>george
>
>
>
>J. Williams wrote:
>
>> Hi, I have a roll of Ektachrome 400.  When I loaded it in my OM-4t, I
>> thought I set the correct ASA but when I rewound the film I see that the
>> ASA is at 800.
>>
>> Now, I'm not sure if the ASA dial moved or I just set it wrong.  I am
>> wondering if I should just have it pushed to 800 or maybe 600.  Any
>> suggestions?
>>
>> John

Winsor Crosby
Long Beach, California
mailto:wincros@xxxxxxxxxxx





< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz