Walt,
I have not had this problem as I don't own this particular lens. I would
suggest dismantling the mount of the hood and cleaning all the parts with
alcohol (assuming that it is mostly resistant to damage from this). Once it
is all dry reassemble without any lubricants as they will tend to trap any
dirt that does get into the grooves. Then clean the bayonet on the front of
the lens taking care to keep the flow of liquid under control so it doesn't
get into the rest of the lens. Q-tips and very, very small amounts of fluid
would be wise.
Go slow and good luck, Dan S.
> [mailto:olympus-owner@xxxxxxxxxx] On Behalf Of Walt Wayman
> Subject: [OM] Re: Zuiko 35-80mm f2.8
>
> And, by the way, my lens hood doesn't fit worth a hoot. Feels
> rough, gritty when turned, hard to get on or off in either
> orientation. I've tried graphite powder to no avail, and now
> I'm thinking about some 400 grit sandpaper and/or maybe some
> polishing compound. Anybody else had this problem?
>
> Walt
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|