Hi Martyn
Here's the bit about the shift lens.
Hold the lens so that you are looking at the rear element (rear cap on is
fine). Shift the lens up to expose the felt light seal. Look closely for a
small hole with a flat-head screw recessed in it. Tighten this screw as
needed. Then shift the lens down and treat the other screw similarly.
FWIW, it only took a very small turn to fix the problem.
These two screws are outside the inner lens cavity (hence you can leave the
rear cap on) and are not particularly small cross-head screws.
Hope that helps.
Sincerely,
Brian Swale
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|