Olympus-OM
[Top] [All Lists]

[OM] Re: Telescopic Auto Tube with OM-4Ti

Subject: [OM] Re: Telescopic Auto Tube with OM-4Ti
From: Moose <olymoose@xxxxxxxxxxxxxxx>
Date: Wed, 25 Aug 2004 13:16:07 -0700
I recently purchased a lens which didn't properly engage an OM-4 body to 
tell it the aperture. Inspection showed that the aperture setting tab 
was bent in towards the center of the lens. A careful adjustment of the 
bent tab corrected the problem. I see the aperture setting tab on the 
65-116 is not as rigidly held in its relatively wide slot as are the 
ones on most lenses. There is definitely some side to side play, so a 
slight mismatch in alignment with the matching mechanical connection in 
the body could easily result in it sliding by.

Moose

Mike Lees wrote:

>I'm not sure what the problem is - will a new Auto Tube cure it or do both my 
>4Ti's need a CLA?
>



==============================================
List usage info:     http://www.zuikoholic.com
List nannies:        olympusadmin@xxxxxxxxxx
==============================================

<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz