Olympus-OM
[Top] [All Lists]

Re: [OM] M15V and MD2 Technical details

Subject: Re: [OM] M15V and MD2 Technical details
From: "C.H.Ling" <chling@xxxxxxxxxxxxx>
Date: Tue, 19 Aug 2003 00:24:07 +0800
I remember I can get 5fps with my OM1n+MD1 at 1/500s without mirror lockup.
That was with good original Ni-cd cell, unfortunately I have all good M15
sold, now I'm keeping only two with Ni-MH cell, they are poorer than the
original one but still get slightly over 4fps.

C.H.Ling

----- Original Message ----- 
From: "Julian Davies" <julian_davies@xxxxxxxxxxxxxx>

> Max frame rate for OM2 is 4fps. This according to the first version of the
> MD manual and Pangerl (plus my and now your measurements) . The assumption
> that 5 is available is down to clever wording in version 2 onwards of the
MD
> manual. 5 is for an OM1 with the mirror locked up.
> Experiments with later bodies indicates that none is significantly faster
> than the OM2, so the 5fps claim for the motors is true only for OM1. Try
it
> and lock the mirror up while winding. The difference is VERY obvious, and
> from a winding / releasing point of view, it's the same camera as an OM2.
> Pretty much the same as a 2S, 3(Ti) 4(Ti) as well, come to that.
>
> Julian


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz