On Mon, 26 May 2003, Dizel wrote:
> I removed bottom one, sliding door, front (to have an access
> to and be able to calibrate rangefinder, removed rewind
> knob, two screws underneath, screws at the top and back
> and now I am stuck because it won't go. I would hesitate
> to use prying rod ;)
Just one more screw to go! Gently pry the little red shutter release
button up using a sharp object inserted along an edge. Be careful though,
the button is very fragile and is easily broken. Under the button you'll
find that final screw. When re-assembling use only a very small amount of
a light adhesive such as Pliobond. You don't want the glue migrating into
the button. Don't use epoxy :-)
-mark
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|