I don't think 4 will fit, because it has the extra bits for power rewind.
Piers
-----Original Message-----
From: owner-olympus@xxxxxxxxxxxxxxx [mailto:owner-olympus@xxxxxxxxxxxxxxx]
On Behalf Of George Sears
Sent: 01 May 2003 18:27
To: olympus@xxxxxxxxxxxxxxx
Subject: [OM] OM2sp base plate needed
Hi Zuiks,
Will an OM4 base plate fit and work OK on an OM2sp?
If not, Needed, base plate for OM2sp. Mine is a bit dented and is
causing problems with the operation of my winder. Nuther words,
winder won't work on this'un but will work on the other one.
Please let me know.
Thanks,
GeoW
George Sears
Savannah, GA 31406
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|