Olympus-OM
[Top] [All Lists]

Re: [OM] Om-1n top plate removal?

Subject: Re: [OM] Om-1n top plate removal?
From: Frank Griffin <frankrad4@xxxxxxxx>
Date: Sat, 27 Jul 2002 22:49:14 -0400
Thanks Mark !  I have the cover off now. There is some foam there turning
to mush. Is the foam on the top there all that should be removed, or is
there more under the cover that is on the prism? Hmmmm, and where did
that large spring come from? :-0
                                Frank

On Sat, 27 Jul 2002 21:39:01 -0400 (EDT) Mark Dapoz <md@xxxxxxxxxxxx>
writes:
> On Sat, 27 Jul 2002, Frank Griffin wrote:
> 
> >          I want to inspect the prism foam inside my OM-1n. I have 
> the
> > rewind knob assembly off and the two screws under it are out. I 
> have the
> > ring shaped nut off where the flash shoe goes and I have removed 
> the the
> > film advance lever. My question is about the ASA dial. Does it 
> come off
> > also to remove the top cover. Am I supposed to pry the dial face 
> off to
> > get to some screws or something? 
> 
> The ASA dial stays with the top.  The top should come off once 
> you've
> removed all the above items.  I assume you also removed the retainer 
> under
> the film advance lever.
>                               -mark
> 
> 
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
> 


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz