Thanks! Unfortunately I've not removed the top cover on the 4t and lack a
repair manual. Any "tricks" I should look out for (like the door spring
flying) in removing the cover?
-----Original Message-----
From: owner-olympus@xxxxxxxxxxxxxxx
[mailto:owner-olympus@xxxxxxxxxxxxxxx]On Behalf Of John Hermanson
Sent: Monday, December 03, 2001 11:11 PM
To: olympus@xxxxxxxxxxxxxxx
Subject: Re: [OM] OM-4t Circuit?
There are pressure sensitive rubber conducting pads inside the top cover
between the top circuit and the buttons on the outside of the top. Cleaning
those would solve some or all of your problems.
_________________________________
John Hermanson
Camtech, Olympus Service since 1977
631-424-2121 www.zuiko.com
Call Olympus for FREE manuals!
1-800-221-3000
_________________________________
----- Original Message -----
From: "Henry Bottjer-BA" <hcbottj@xxxxxxxxxxxxxxxx>
To: "Olympus Mail List" <olympus@xxxxxxxxxxxxxxx>
Sent: Monday, December 03, 2001 11:02 PM
Subject: [OM] OM-4t Circuit?
> I recently acquired a used OM-4t. Seems to be in great shape, however the
> "clear" switch seems to work inconsistently and the and "hi.light" button
> does not work at all. Spot and Shadow buttons work fine, but the "memo"
> function doesn't hit 100 0.000000irst time either. Everything else on the
camera
> seems to be working perfectly.
>
> Anybody got any ideas?
>
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|