Olympus-OM
[Top] [All Lists]

Re: [OM] What battery or spacer for a 1.5 volt altered OM 1

Subject: Re: [OM] What battery or spacer for a 1.5 volt altered OM 1
From: "John Hermanson" <omtech@xxxxxxxxx>
Date: Fri, 19 Oct 2001 08:44:09 -0400
A nylon ring 1/2" ID, 5/8" OD and about 2mm thick is perfect, but using the
1.5v battery without some kind of compensation will yield up to a 3 stop
error.

John  Hermanson
___________________________________
http://www.zuiko.com
Camtech, Olympus Service since 1977.
21 South Lane,  Huntington NY 11743-4714
Phone/fax 631-424-2121
Free Olympus Manuals: 1-800-221-3000
___________________________________
----- Original Message -----
From: <NSURIT@xxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Thursday, October 18, 2001 8:34 PM
Subject: [OM] What battery or spacer for a 1.5 volt altered OM 1


| What would the battery number be for a 1.5 V battery to fit in an OM 1?
| Seems like someone had mentioned a spacer or washer that would allow you
to
| use the same 1.5V battery used in the 2,3 or 4. What would that item be
and
| where might one be found?  Bill Barber
|
| < This message was delivered via the Olympus Mailing List >
| < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
| < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|



< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz