I don't think so -- there's two designs, and the earlier one _might_, it's
difficult to tell from the parts page. If it has a knurled ring at the back,
you
might try. The later one surely doesn't -- the lens has to be disassembled for
removal of the hood.
Bill Stanke wrote:
> CLinton:
>
> Does the lens hood on the 200 mm f/5 also just unscrew? I would like to
> take the hood off of the lens and re-paint it, but I didn't want to
> "reef" on it.
>
> Thanks!
>
> Bill Stanke
>
> clintonr@xxxxxxxxxxxxxxxx wrote:
> >
> > Order part #CB080400 from Olympus/Parts. It's still available (we use it to
> > fix a light leak on the Stylus Zoom).
> >
> > The hood just unscrews -- hold the knurled part at the back of the hood, and
> > unscrew the hood from it. The felt goes inside the knurled ring, though, I
> > believe -- to get it off, you'll have to remove the brass stop screw(s) in
> > front of it.
> >
> > Mike wrote:
> >
> > > Any way to tighten the integral hood on a lens? Specifically the 85-250.
> > > There is no friction so it just flops. otherwise the lens works fine. Is
> > > there a way to remove the hood and restore the felt or whatever gives
> > > enough friction to work properly?
> > >
> > > Thanks, Mike
> > >
> > > --
> > > Latitude 48° 32' North, Longitude 123° 7' West
> > >
> > > < This message was delivered via the Olympus Mailing List >
> > > < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> > > < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
> >
> > < This message was delivered via the Olympus Mailing List >
> > < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> > < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|