Olympus-OM
[Top] [All Lists]

Re: [OM] Help! Can't get scanner installed

Subject: Re: [OM] Help! Can't get scanner installed
From: John Pendley <jpendley@xxxxxxx>
Date: Thu, 16 Aug 2001 16:13:50 -0400
Wayne,
Thanks for the reply. I tried it, pressing Tab during bootup, and I didn't see the scanner listed unless it was the very last device listed. It went by so quickly that I couldn't read it.
John

At 03:47 PM 08/16/2001 -0400, you wrote:
You have to have the scanner on before you power up the PC in order for the
scsi card bios to recognize the attached scanner. You should see the scanner
mentioned during boot up. You may need to get rid of the Micro-uck banner
during bootup to see these messages. At least that is the case with most
adaptec scsi cards.

Wayne


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz