ASA knob and cover plate do not have to come off. If you try to remove the
knob the stamping which holds it to the top cover may let go. And then,
that's that!
John Hermanson
___________________________________
http://www.zuiko.com
Camtech, Olympus Service since 1977.
21 South Lane, Huntington NY 11743-4714
Phone/fax 631-424-2121
Free Olympus Manuals: 1-800-221-3000
___________________________________
----- Original Message -----
From: "Kiker, James" <jkiker@xxxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Friday, June 22, 2001 9:49 AM
Subject: RE: [OM] OM-1 winding problem
John Hermanson wrote:
> The wind mechanism under the top cover is either stripped (jammed then
> forced) or the ratchet mech. is sluggish due to grease.
and clintonr@xxxxxxxxxxxxxxxx wrote:
> See if you can wind the camera by turning the sprocket with your thumb
> -- if so, and the shutter otherwise operates normally, that's a very
> positive sign. Your problem is likely in the wind clutch itself,
which
> can be replaced or cleaned.
Thanks to both of you for the information. After John wrote back with
this info, I decided to remove the top cover to see if I could tell if
it was a hardened grease problem. I unscrewed the rewind knob, and was
about to take the wind lever off. It was tight, so I tapped it a few
times with the plastic handle of a screwdriver, hoping to loosen up the
screw. It turns out that tapping it dislodged whatever was preventing
the ratcheting teeth from engaging, and it works very smoothly now. I
tried it a couple dozen times, and it worked perfectly every time. So I
put it back together. One question for future reference: Does the ASA
dial need to be removed in order to remove the top cover? I couldn't
see an obvious way to remove it, and didn't end up needing to, but I'm
curious. Does it stay attached to the top cover when the cover is
removed?
Thanks,
James Kiker
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|