Olympus-OM
[Top] [All Lists]

RE: [OM] OM-PC and Bounce Grip

Subject: RE: [OM] OM-PC and Bounce Grip
From: "Brian P. Huber" <bphuber@xxxxxxxxxx>
Date: Sun, 13 Aug 2000 00:51:54 -0400
Morgan,
I'm not aware of anything on the market.  From all I know, OM-PC is TTL only
with on-camera flash units.
I'm not aware of any way to get TTL control to the BG2.

The only way I see to get off-camera TTL on a PC would be to use:

Sunpak EX10 cord with a Sunpak DX series flash and OT-1D, or an EX11 with a
555 or 622
Vivitar DSC-1 and 3600 or 4600 w/DM/O adapter
Vivitar DSC-2 and 3900 w/DM/O adapter
Vivitar DSC-3 and 5200 or 5600 and PM/O adapter
Metz SCA321 and 300A cord to a 32-CT3 or equivalent (using the CT-32 on a
Power Grip 15 would be the virtual equivalent of a BG2).


Brian P. Huber

Troy, OH
bphuber@xxxxxxxxxx

Does anyone know if there's an OEM cable to mate the OM-PC/OM-40 to the
BG2 in TTL mode?  Or, something that will go from a fixed shoe 4 to
5-pin TTL socket?  Both my OM-2's have accumulated enough problems to
preclude their use; my 2S has a flunky winder switch and my 2N's prism
terminal has gone dead.

(If I've missed an obvious reference in the SIF pages, I apologize!)

Morgan Sparks


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz