Olympus-OM
[Top] [All Lists]

Re: [OM] T Power Control/T10

Subject: Re: [OM] T Power Control/T10
From: "John Hermanson" <omtech@xxxxxxxxx>
Date: Wed, 29 Dec 1999 21:02:03 -0500
Actually, with proper parts you can convert a T32 to a T Power and vice
versa.  Circuits and inside workings are identical.

John
________________________________
Closed 12/20 through 12/31/1999
Camtech, Olympus Service since 1977.
21 South La.  Huntington NY 11743
631-424-2121 http://www.zuiko.com
Free Olympus Manuals: 1-800-221-3000
--------------------------------------------------------------
----- Original Message -----
From: Mark Dapoz <md@xxxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Tuesday, December 28, 1999 7:40 PM
Subject: Re: [OM] T Power Control/T10


> >     Most ring flashes use 500-550V rather than the more common 330v used
for
> > shoe flashes like the T20/T32. This is probably because of the long
flash
> > tube in the ring flashes. But the TPower Control works with the Bounce
grip 2
> > which provides 330V to the normal T series flashes so the implication is
that
> > the T10/TPower control uses the same 330V as the normal T20/T32 series
> > flashes. Can anybody verify this for me?
>
> Since the T-Power Control also works with the T28 head which is basically
> a T32 tube in a special housing, I would say it uses the lower voltage.
> Didn't someone (John H?) mention a while back that the T-Power Control
uses
> the same electronics as the T32?
> -mark
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz