Olympus-OM
[Top] [All Lists]

Re: [OM] (Fwd) OM40/PC and Winder 2

Subject: Re: [OM] (Fwd) OM40/PC and Winder 2
From: "John Hermanson" <omtech@xxxxxxxxx>
Date: Mon, 8 Nov 1999 17:50:10 -0500
The winder should work.  The extra contact (like the OM-G) provides auto
wind to the first frame after the back is closed.  The switch inside the
body may be dirty or out of adjustment.

John
________________________________
Camtech, Olympus Service since 1977.
21 South La.  Huntington NY 11743
631-424-2121 http://www.zuiko.com
Free Olympus Manuals: 1-800-221-3000
--------------------------------------------------------------
----- Original Message -----
From: Giles <cnocbui@xxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Monday, November 08, 1999 4:07 PM
Subject: [OM] (Fwd) OM40/PC and Winder 2


> ------- Forwarded Message Follows -------
> From:          Reynolds Paul <PReynolds@xxxxxxxxxxxxxxxx>
> To:            "'owner-olympus@xxxxxxxxxxxxxxx'"
<owner-olympus@xxxxxxxxxxxxxxx>
> Subject:       OM40/PC and Winder 2
> Date:          Mon, 8 Nov 1999 07:57:44 -0000
>
> Could anyone explain why a winder 2 I purchased recently does not work
with
> the OM40? I tried the same Winder with an OM10 and it works fine. There
are
> 3 contacts on the OM40, only 2 on the OM10 and winder. Does this make any
> difference?
>
>
>
>
> Paul Reynolds
> Cheltenham
> UK
>



< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz