A spanner wrench with round tips will do the least damage to the black trim
plate. Un screw the top cap, remove wind lever from camera, transplant
washer that may be sticking to the underside of the old lever back onto the
body, install new lever by reversing procedure.
John
----------------------------------------------------------------
Camtech / Olympus Service since 1977
21 South La., Huntington NY 11743-4714
516-424-2121 http://www.zuiko.com
--------------------------------------------------------------
----- Original Message -----
From: Dan Lau <dlau@xxxxxxxxxxxxxxxx>
To: <olympus@xxxxxxxxxxxxxxx>
Sent: Friday, October 01, 1999 1:44 PM
Subject: [OM] How to remove film advance crank
> Thanks to Chris Platt (the guy who offered OM1n parts for free),
> I now have a brand new film advance crank for my OM1n. But what
> is the best way to remove the old crank if I don't have the right
> tool to do it? What is the best alternative to unscrewing the
> cap that holds the crank in place? Any suggestions appreciated.
> Thanks.
> -Dan
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|