>I recently bought an as-is T32 Flash. It appears to function but is missing
>the slide-in plate with GN calculator. Unlike the T20 flash in which the
>plate does not appear to set any switches, the missing plate operates a
small
>switch at the end of the housing for the slide.
The plate in the T20 sets the flash to manual when in TTL auto mode. Same
with T32. The flash in manual and camera in auto gives TTL auto function
(with compatable flashes)
>1) In which position does this switch get depressed by the plate?
>2) What are the click settings of the normal slide switch just below this
>plate?
>
> In the T20 their are only three click positions. In the T32 there appear
to
>be 5.
> The T20 has manual and 2 auto non-off-film fstop choices, plus the slide
>reversed position (OTF). I would guess the T32 may just have more Fstop
>choices ?
T32 has GN 32, GN 16, and 3 normal auto positions (from left to right)
Foxy
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|