Olympus-OM
[Top] [All Lists]

Re: [OM] OM-2SP / Winder 2 problem

Subject: Re: [OM] OM-2SP / Winder 2 problem
From: Pauls0627@xxxxxxx
Date: Sat, 17 Oct 1998 13:26:55 EDT
In a message dated 10/17/98 1:07:22 PM Eastern Daylight Time,
rhdesign@xxxxxxxxxxxxx writes:

<< Also, occasionally the meter seems to "freeze" and I
 need to move the switch to "reset" in order to unfreeze it. This again only
 happens with the winder - when the camera shutter release is used,
 everything's fine (even with the winder still attached). The other body is
 fine, so it's the camera rather than the winder. I would guess it's an
 electrical rather than mechanical problem - I've searched the archives to
 no avail, does anyone have any suggestions please?  Thanks :-)
  >>

My be a bit obvious, but have you tried new batteries in the camera? May be
worth a shot, even if they check OK. Somebody (Shawn?) recently had a similar
problem with an OM-10, I think. Batteries fixed it.

Paul Schings
Coventry, RI

< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz