Olympus-OM
[Top] [All Lists]

RE: [OM] More about Remote Cord & Winder 2

Subject: RE: [OM] More about Remote Cord & Winder 2
From: Greg Heier <gheier@xxxxxxxxxxxxxxxxx>
Date: Tue, 15 Sep 1998 17:02:28 -0500
Are the winders different than the motor drives in this respect? I could
swear I've done this with a motor drive 1 and had it advance the film
after I triggered the cable release...

> -----Original Message-----
> From: owner-olympus@xxxxxxxxxxxxxxx
> [mailto:owner-olympus@xxxxxxxxxxxxxxx]On Behalf Of R. Lee Hawkins
> Sent: Tuesday, September 15, 1998 4:52 PM
> To: olympus@xxxxxxxxxxxxxxx
> Cc: lhawkins@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [OM] More about Remote Cord & Winder 2 
> 
> 
> In your message dated: Tue, 15 Sep 1998 15:31:04 CDT you write:
> >You *can* use a cable release if you want B remotely. The winder will
> >still do it's thing.
> 
> You can use a cable release in the main (manual) shutter 
> release button.
> This will NOT activate the winder, however.  See mine and JH's posts..
> using a remote cord on B gives a shutter speed of 1/500th sec.  Or are
> you talking about something totally different?
> 
> Cheers,
> --Lee
> 
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
> 

< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz