As an afterthought, I believe the smaller charger is glued or plastic welded
shut
at the factory. The only fix was/is replacement of the entire unit.
John
John Hermanson wrote:
> There may be some space at the corners of the metal plate to slip the tip of a
> single edge razor blade. You can pop it up just enough to slip more of the
> blade underneath. Sorry, but some bending of the plate or mangling at a
> corner
> is to be expected. Straighten best as possible or use a new cover plate
> (Unknown if available ((should be)).
>
> John
>
> David Brown wrote:
>
> > John - is there a way to remove the metal plate without damaging it? The
> > solvents I would normally use to remove the glue (eg acetone) will dissolve
> > the plastic cover.
> >
> > I ask this because I have two chargers which can be altered by moving the
> > screw for different voltages. The third looks identical and has the four
> > screw holes marked different voltages but nowhere for a screw to grip!
> >
> > Thanks for your help, David
> >
> > ----------
> > > From: John Hermanson <omtech@xxxxxxxxx>
> > > To: olympus@xxxxxxxxxxxxxxx
> > > Subject: Re: [OM] M15V NiCad charger 1
> > > Date: 12 August 1998 14:55
> > >
> > > There are 2 chargers, both marked Charger 1. The one I have is
> > adjustable for
> > > voltage input. The other charger is smaller and has no adjustment for
> > input.
> > > The larger charger has 4 screws holder the case together. They are
> > located
> > > under the metal name plate which is glued on.
> > >
> > > John
> > >
> > > David Brown wrote:
> > >
> > > > Stupid question - can anyone advise me as to how to remove the cover
> > > > (preferably without damaging it!) from a M15V NiCad Charger 1 - this is
> > the
> > > > charger for the MotorDrive 2 unit.
> > > >
> > > > Thanks, David
> > > >
> >
> > >
> > >
> > >
> > >
> > > < This message was delivered via the Olympus Mailing List >
> > > < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> > > < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
> >
> > < This message was delivered via the Olympus Mailing List >
> > < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> > < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|