I forgot to mention that, ;-) I could be wrong !
Does the MQuartz control actually get feedback to reflect what the lcd says on
motor 2 or must you set the controller to the length of film you are using then
it counts down and stops at zero?
John
Camtech
Frank van Lindert wrote:
> On Thu, 02 Apr 1998 08:18:57 -0500, John Hermanson <omtech@xxxxxxxxx>
> wrote:
>
> >The stereo plug is, I believe, a red herring. The sockets in the motors and
> >winders are 2 conductor. The extra contact in the plug allows insertion
> >without causing the momentary short that would cause the motor to fire a
> >frame.
> >
> >John
> >Camtech
> >
> I never opened an MD2, John, so I believe you immediately. But how is
> the counter on the quartz remote being driven then?
> And another one: why don't all olympus remote cords (with the red
> switch) have the same short circuit protection plug?
>
> Frank.
>
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|