Olympus-OM
[Top] [All Lists]

[OM] Re: Questions about the OM10 Manual Adapter

Subject: [OM] Re: Questions about the OM10 Manual Adapter
From: "John Hermanson" <omtech@xxxxxxxxx>
Date: Fri, 1 Apr 2005 08:07:26 -0500
Problem may be dirty selector board for manual adapter position. Try turning 
the selector from B-auto-manual adapter back and forth, over and over again. 
to (possibly) clean switch off.

John Hermanson
Camtech Photo Services, Inc.
21 South Lane, Huntington, NY, 11743-4714,
631-424-2121, www.zuiko.com
Olympus OM Service since 1977
<:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:-:>
----- Original Message ----- 
From: "ScottGee1" <scottgee1@xxxxxxxxx>
To: <olympus@xxxxxxxxxx>
Sent: Thursday, March 31, 2005 10:37 PM
Subject: [OM] Questions about the OM10 Manual Adapter


>I was one of the fortunate few who received a Bill Barber 'OM10 Grab
> Bag' complete with Manual Adapter.
>
> The camera works well in full Auto mode and Bulb.
>
> Following the instructions in the manual, I popped the adapter itself
> onto the camera and set the mode dial to 'Manual Adapter'.  Selector
> Dial is set to 'On'.  However, no matter which shutter speed I select
> on the MA, the camera seems to fire at around 1/60 second.
>
> Am I missing something?  Is a secret handshake required?
>
> TIA for any advice./ScottGee1
>


==============================================
List usage info:     http://www.zuikoholic.com
List nannies:        olympusadmin@xxxxxxxxxx
==============================================

<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz