Olympus-OM
[Top] [All Lists]

[OM] Re: Power Bounce Grip 2 (was: T32 Flash - the whole kit and kaboo

Subject: [OM] Re: Power Bounce Grip 2 (was: T32 Flash - the whole kit and kaboo
From: Chuck Norcutt <chucknorcutt@xxxxxxxxxxx>
Date: Wed, 13 Oct 2004 09:14:39 -0400
Ali asked:
What is a "complete" PB Grip 2? Is there a bracket for mounting
underneat the camera body? From the picture in this auction...seems like
there is just one piece...while other auctions picture 2 pieces.
-------------------------------
The bounce grip 2 is composed of two major pieces that lock together to 
form a 90 degree angle.  Horizontal piece attaches to camera via tripod 
socket.  Vertical piece holds C-size batteries and flash unit.

If you want to use your T-20 or T-32 in TTL mode you will need a short 
TTL cord to make a TTL electrical connection between body and grip. 
With the T-32 you could also connect directly to the flash if desired. 
With the T-20 the ability to connect to the grip resolves the problem of 
the T-20's lack of a TTL socket ala T-32.  With a T-32 you can also 
connect more than one flash without a TTL multi-connector by connecting 
from camera to grip and then from T-32 to another T-32 or T-20 with T-20 
auto connector.  With an OM-2s or 4 you can also stick another T-32 in 
the hotshoe and then run a TTL cable from that to yet another T-32.

To use the grip with a motor drive or winder you also need an M-grip 
cord.  Neither the TTL or M-grip cords are included with the grip.

See users guide here: 
<http://olympus.dementia.org/eSIF/om-sif/flashphotogroup/power_bounce_grip.htm>

Chuck Norcutt


==============================================
List usage info:     http://www.zuikoholic.com
List nannies:        olympusadmin@xxxxxxxxxx
==============================================

<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz