There is hinge and slot foam, similar to an OM-1, but slot foam is a little
thinner. Care should be taken not to foam-over the actuating pin in the
BOTTOM slot as well as the top. Bottom slot pin (about 2" from the left)
actuates auto load with MD-2, top tab (about 1" from the right) resets the
counter.
_________________________________
John Hermanson
Camtech Photo Services, Inc.
21 South Lane,
Huntington, NY, 11743-4714,
631-424-2121, www.zuiko.com
_________________________________
----- Original Message -----
From: "Chris Barker" <ftog@xxxxxxxxxxxxxxxx>
To: <olympus@xxxxxxxxxx>
Sent: Friday, August 27, 2004 5:40 PM
Subject: [OM] Foam in an OM20/G?
>
> Chaps and Chappeses
>
> My son took his OM20 on holiday to Ibiza a few weeks ago and some of
> his prints show orange banding. I suspected a light leak and have
> removed what was left of the light trap material. But there was only
> some at the hinge end of the door. Can anyone tell me how much foam
> there should be in the film compartment of an OM20? Does it run the
> length of the door, top and bottom, or is it only at the hinge end?
>
> Cheers
>
> Chris
> <|_:-)_|>
>
> C M I Barker
> Cambridgeshire, Great Britain.
>
> +44 (0)7092 251126
> ftog at threeshoes.co.uk
> http://www.threeshoes.co.uk
> http://homepage.mac.com/zuiko
> ... a nascent photo library.
>
>
==============================================
List usage info: http://www.zuikoholic.com
List nannies: olympusadmin@xxxxxxxxxx
==============================================
|