Olympus-OM
[Top] [All Lists]

Re: [OM] 2 XA Converter and 200/4 'false recall' question

Subject: Re: [OM] 2 XA Converter and 200/4 'false recall' question
From: "John A. Lind" <jlind@xxxxxxxxxxxx>
Date: Sat, 31 May 2003 23:52:52 -0400
NSURIT@xxxxxxx wrote:
According to the Olympus Sales Information File (a dealer reference, the publication date which is unknown) it was suitable for the 100mm f2.8, 135mm f2.8, 135mm f3.5, 200mm f4 and the 100-200mm zoom. Bill Barber

I don't doubt more than acceptable results with many lenses not listed as recommended. Indeed. like Walt, I try it on non listed and non-Oly lenses to make sure there is no mechanical conflict and try it out of it fits.

I've mutually abused a 2X-A with a 300/4.5 even though the 1.4X-A is the only of the two TC's listed for it. Works quite nicely producing a slow 600/9 lens, but quite excellent in the contrast/resolution. The biggest problem is eliminating camera shake. I use a very floppy cable release with it now after discovering the stiffer one can cause visible shake in the viewfinder.

I've also used it with a 135/2.8 and 200/4, with equally excellent results, albeit controlling shake wasn't nearly an issue.

-- John


< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >


<Prev in Thread] Current Thread [Next in Thread>
Sponsored by Tako
Impressum | Datenschutz