The screws found under the brass shim hole covers (found immediately under
the focus rubber)are the nylon rollers for the front tube, as I recall, the
zoom tension adjustment is found elsewhere.
_________________________________
John Hermanson www.zuiko.com
Camtech, Olympus Sales & Service since 1977
21 South Lane, Huntington NY 11743-4714
631-424-2121 For Free Olympus manuals,
please call 1-800-221-3000
_________________________________
----- Original Message -----
From: "Ian BManners" <om@xxxxxxxxxxxxx>
To: "olympus@xxxxxxxxxxxxxxx" <olympus@xxxxxxxxxxxxxxx>
Sent: Saturday, April 26, 2003 9:49 PM
Subject: Re: [OM] 65-200 zoom creep
> Hi Daniel
>
> > Not that I could find, no -- I took the rubber grip sleeve off, no joy,
but
> >I might have just missed it, admittedly.
>
> Carefully remove the tape over the long brass looking thin metal
> covers, this will also peal those covers off, under here you will
> find some white tightning screws, hmm I think, its been a while
> since I looked. Make sure you test the zoom/focus before you
> reassemble.
>
> Cheers
> Ian Manners
> http://www.comkal.com.au/
>
>
>
> < This message was delivered via the Olympus Mailing List >
> < For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
> < Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
>
>
< This message was delivered via the Olympus Mailing List >
< For questions, mailto:owner-olympus@xxxxxxxxxxxxxxx >
< Web Page: http://Zuiko.sls.bc.ca/swright/olympuslist.html >
|